Wash-in waterproofing for all horse rugs

• Adds / renews water repellency and revives breathability of horse rugs
  
• Resists water absorption due to flex & abrasion damage
  
• Prolongs the life of gear and optimises performance in wet weather
  
• Maintains insulation, keeping your horse warm
  
• Treatment will reduce the growth of mildew in the rug
  
• Easy to apply - can be used in a washing machine or applied by hand, no tumble drying required
  
• Will not affect cosmetic appearance
  
• WaterBased - environmentally friendly, biodegradable, non flammable, non hazardous * Does not contain fluorocarbons

• All horse rugs and blankets with breathable linings
• Recommended for use on Rambo Rugs
  

For best results always clean rug first with Nikwax® Rug Wash. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.

Machine Wash:

1. Remove all detergent build-up from the detergent dispenser.
2. Place clean rug in washing machine.
3. Use 500 ml for 1 rug. Treat 1 rug per load.
4. Run 30° cotton cycle.

Hand Wash (use gloves):

1. Use 500 ml for 1 rug, with 10 litres of hand-hot water in vessel.
2. Agitate to mix, push down into vessel so that whole rug is immersed.
3. Add a further 15 litres of warm water to cover rug and agitate.
4. Leave to soak for 2 hours, agitating occasionally.
5. Rinse in cold water until water runs clear.

Sponge Application (use gloves):

1. Spread clean rug on clean area and wet thoroughly with a hose.
2. Use 500 ml for 1 rug, with 1.5 litres of hand-hot water.
3. Using a new sponge apply solution to rug, working into fabric and seams.
4. Use any surplus on back area of rug, leave for 5-10 minutes.
5. Rinse in cold water until water runs clear.

Drying:

Air dry or tumble dry on a low setting if care label allows.